html-structure
This blog discuss about the publishing HTML page in Raspberry Pi. A web page should start with a doctype declaration tells browsers that the page is HTML. In the latest HTML standard, HTML5, the doctype is declared like this: <!DOCTYPE html> The rest of the document should be wrapped in […]

Publishing a HTML page in Raspberry Pi


samba_svr
In this blog, lets about the sharing files & folders of Raspberry Pi with installation & configuration of Samba Server. Raspberry Pi’s files and folders can be shared across a network using a piece of software called Samba, a Linux implementation of the Server Message Block protocol. You’ll need to […]

Sharing files & folders of Raspberry Pi


raspberry-pi-2-hero-970-80
This post is about the Raspberry Pi2 setup for beginners for the Newbies. The RRaspberry Pi2  new Broadcom BCM2836 system-on-chip, which handles the Pi’s video, audio and processing, among other things, has also had a speed bump to 900MHz. The Pi is otherwise unchanged from the B+ model; you still get […]

Raspberry Pi 2 setup for beginners



cli-commands
Blog about the  Useful Commands in Raspberry Pi  you have came across many new and innovative applications for Raspberry Pi, but these ate your time in not having commands in a place to work. This is not a cheat sheet. But yet this following set of commands is very very […]

Useful Commands in Raspberry Pi


Emulator_1_5_Scratch_Platter
This post is about Emulation of Raspberry Pi in windows system. In computers, an emulator is a hardware device or a program that pretends to be another particular device or program that other components expect to interact with. For example, using a 3270 emulator, a program written to be used with […]

Emulation of Raspberry Pi


Itead arduino shield
this post is all about the Arduino Shield (Add on) -RaspberryPi interfacing .This interfacing makes the use of Raspberry Pi too good, thereby facilitating the use of all Arduino shields with Raspberry Pi. Shields are modules that can be fitted to the Arduino platform, allowing one to add functionalities or increase […]

Arduino Shield Add-on for Raspberry Pi



identifying fault
Biggest problem in electronics is identifying faults in components. You may came across many Breakout Boards, Shields or even the boards made by you. In all these it is necessary to check out the faults when these were malfunctioning as it may brick the SBC / Micro controller board connected […]

Identifying faults in components



makefile
In this post , we are going to see about “makefile in linux” . Makefiles are a simple way to organize code compilation. This tutorial does not even scratch the surface of what is possible using make, but is intended as a starters guide so that you can quickly and easily […]

What is a makefile in linux



Shell-scripting-job-flow
  To master in Embedded Linux , One has to know about the basics of the shell /bash scripting. The shell scripting helps us to write a driver, patch, kernel update & many more to make a Strong, condensed embedded linux applications. Given below are the some examples of shell […]

Some basic Shell Scripting !